Compliance is part of operating the floor
Every machine on a floor is a regulated device running approved software, taking cash from the public, and subject to rules on what it may stake, pay and display. A floor that earns well but cannot prove its machines are running the approved software, or cannot explain a pattern of ticket redemptions, is exposed in ways that no win-per-unit figure shows.
This lesson covers four obligations: keeping machines to an approved standard, limiting what they can do, building in responsible gambling protections, and spotting money laundering. Lesson 4 covered the systems and cash controls these rest on, and the Casino Game Mathematics course covered how a lab checks the maths.
Technical standards: the lab tests, the jurisdiction decides
Most jurisdictions do not write machine standards from scratch. They adopt a laboratory standard and amend it.
GLI-11, Gaming Laboratories International's standard for gaming devices, is the common base. Version 3.0, released on 21 September 2016, sets out to test only the criteria that affect a device's integrity from both the revenue and the player's perspective, and to distinguish local public policy, which is for each jurisdiction, from laboratory criteria. It can be adopted in whole or in part.
Massachusetts shows what adoption looks like. Its gaming regulations incorporate GLI-11 version 3.0 by reference, subject to amendments that include replacing the standard's 75% minimum payout percentage with 80% and counting free play in the calculation (text as at the Massachusetts Register of 9 October 2026). Illinois sets its own for route terminals: a minimum theoretical payout of 80% and a maximum of 100%.
Great Britain writes its own gaming machine technical standards by category. As at November 2026, the Gambling Commission says finalised new standards and a new testing strategy take effect on 30 June 2027, and test houses must hold full accreditation to BS EN ISO/IEC 17025.
The practical consequence: a certificate says a game meets a standard, and the jurisdiction's amendments decide whether that game may go on your floor. Always check the amended version, not the lab's base text.
Field verification and change control
Approval covers a specific build. The floor's job is to prove that what is running is what was approved, every day.
Verification built into the device. GLI-11 requires a device to allow an independent integrity check of its program storage from an outside source, supporting field verification of the software. Inspectors use this to confirm signatures on site.
Verification through the central system. Massachusetts requires every slot machine to communicate with the Commission's central monitoring system, send per-bet data on wagers, wins, cash in and cash out, allow remote software verification and remote disabling, and report door opens, restarts and game changes. Illinois's route system works the same way, as lesson 5 described.
Removal on notice. In Great Britain a licensee must not make a machine available once the Commission notifies it that the machine's supply or maintenance was not licensed or did not comply with the technical standards.
Good change control follows from these:
- An approved-software list for every cabinet, checked against what is installed.
- A log entry, a reason and a second person for every logic door opening.
- Signature verification after every conversion, memory clear or board swap.
- Game changes reconciled to approvals before the machine goes back into play.
Stake and prize limits
Where limits exist they are public policy, set by the jurisdiction. Lesson 1 mapped Britain's categories by premises; the figures below are the Commission's guide as at November 2026, last updated in January 2024.
| Category | Max stake | Max prize |
|---|---|---|
| B1 | £5 | £10,000 (£20,000 linked progressive) |
| B2 | £2 | £500 |
| B3 | £2 | £500 |
| B4 | £2 | £400 |
| C | £1 | £100 |
Source: Gambling Commission, gaming machine categories.
Illinois route terminals carry a $4 maximum wager and a $1,199 maximum award per game, which features such as double up cannot breach and which a game may not reach by truncating a bigger win. The second point matters: a limit has to be designed into the maths, not imposed by cutting off a win the player was shown.
Responsible gambling on the floor
Online tools are covered in the Responsible Gambling course. On the floor, the levers are the machine, cash access and exclusion.
At the machine. British betting licensees must make B2 players make an active choice whether to set time and money thresholds for customer and staff alerts. The Commission's September 2026 decisions go further: a new gaming machine session definition from 30 March 2027; from 30 June 2027 new Category B machines must show elapsed time and net position and offer gambling management tools, awards below the stake may not be celebrated, and features that shorten the time to a result are banned.
Cash access. Distance from cash is a protection. In Victoria, as at November 2026, ATMs are not permitted in gaming venues unless approved; EFTPOS cash withdrawals are capped at $200 per transaction and $500 per card in 24 hours, with none from credit accounts; and no ATM or EFTPOS device may be accessible for cash withdrawal within the gaming machine area. British licensees must not accept payment for gambling by credit card.
Exclusion. A self-exclusion scheme only works where it reaches the machines. As at November 2026, Illinois's programme covers casinos (since 2002) and sports wagering (since 2019), not route terminals; our report covers the October 2026 proposal to bring VGTs in.
AML at the cage and the machines
A slot floor is a cash business, and its laundering risk sits where cash becomes a ticket and a ticket becomes cash. The AML course covers monitoring in general; these are the floor-specific points, using US rules.
Currency transaction reports (CTRs). A US casino reports currency transactions over $10,000 in a gaming day. FinCEN's 2012 guidance says cash-in and cash-out are aggregated separately, never netted; bills inserted into gaming machines in multiple transactions and slot or VLT jackpots are exempt from CTRs, the bills only unless the casino has knowledge.
Suspicious activity still applies. The same guidance says transactions through slot machines and VLTs are covered by suspicious activity reporting, which applies to suspicious patterns aggregating to $5,000. It names two TITO weaknesses: a series of redemptions just under a kiosk's limit, usually $3,000, at one kiosk or two nearby within minutes; and bills fed into several machines, little or no play, tickets printed and cashed at a kiosk with no human contact. Each ticket carries the issuing machine number and an 18-digit validation number, so kiosk redemption reports can be tied back to machines and, through a player card, to people.
Staff are part of the risk. FinCEN's 2009 advisory on structuring describes a cashier telling a player to cut a chip redemption below $10,000 to avoid a report, and a pit boss helping a patron time buy-ins around the end of the gaming day; both must be reported. The 2012 guidance cites slot technicians who created over $1.5 million of fraudulent $1,000 tickets in six months.
British casinos face the same pattern: the Commission's July 2026 assessment added TITO machines used with automatic ticket redemption machines as a new medium risk, and rates gaming machines used to launder funds as high.
A checklist for a compliant floor
- Approvals: every cabinet's software matches an approval under the jurisdiction's amended standard, verified on a schedule and after every change.
- Limits: stake, prize and return settings match local rules, and no feature can breach them.
- Protections: limit-setting, break and display features are live and tested, cash access sits outside the gaming area where rules require it, and exclusion lists reach the machines.
- Cash data: bill-in, ticket-out and kiosk redemption reports are reviewed for low-play cash-outs and repeated just-under-limit redemptions.
- People: cage, slot and technical staff know structuring is reportable whoever proposes it.
- Common mistake: treating the lab certificate as the end of compliance. It is the start; the floor proves conformity every day.